NC-301电缆夹连接器 clamp connector 同 ABB THOMAS&BETTS NC301
NC-301电缆夹消除应力全金属连接器的产品特点和简介：
业界也叫做ROMEX 连接器，共有7种不同的规格。
锌压铸romex 电线连接器使用2根预配好的螺丝紧固锁附后，提供良好的电线定位防位移和消除应力效果。满足UL 514B and CSA C22.2标准。
特殊的带防松棘齿的锁紧螺母提供良好的紧固和抗震效果。
锌合金压铸材料及抛光处理。
| 零件编号 | Trade Size 标称 | 标准包装数量 | L | B |
| D0 | 3/8" | 1000 | 0.825 | 0.421 |
| D1 | 1/2" | 1000 | 0.825 | 0.421 |
| D2 | 3/4" | 500 | 1 | 0.482 |
| D3 | 1" | 250 | 1.285 | 0.78 |
| D4 | 1-1/4" | 250 | 1.312 | 0.71 |
| D5 | 1-1/2" | 150 | 1.453 | 0.817 |
| D6 | 2" | 100 | 1.59 | 0.823 |
Sinohua Clamp tyep NM Cable Connector, also called Romex connector
Product Overview:
◆ Application Type: Wire Cable Fittings
◆ Material: Zinc
◆ Finish: Polished
◆ Trade Size: 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" (D0 is a good alternative solution for THOMAS&BETTS NC301)
An insert clamps the cable in place and provides more strain relief than standard snap-in cord grips for building cable. Use to connect building cable for dry locations, also known as Romex type NM-B cable, to enclosures and outlet boxes by pushing these grips into a knockout..
Product Details of clamp connectors
Sinohua non metallic NM Cable Connector is used to bond non-metallic sheathed cable and flexible cord to a steel box or enclosure. Sizes 1” through 2” are also suitable for service entrance. The two-screw design and serrated conduit locknut securely fasten cables to a box.
The cable clamp connector has UL approval. This clamp type cable connector is fabricated according to Standard for Conduit, Tubing, and Cable Fittings according to UL 514B and CSA C22.2 NO.18.3-12.
The non-metallic cable connector is made from zinc that less likely gets rusty. This nonmetallic cable connector in zinc ensures product integrity and longevity. however, These NM connector is for use in dry locations only.
The non-metallic twin-screw cable clamp connector, also known as Romex connector, is available from 3/8" up to 2". Please note that Southwire is the registered trademark holder on Romex brand electric wiring. Therefore, when you use "Romex Connector" in any documentation, please make sure that you mention Southwire as a trademark holder.
