低矮型卡入式防水接头 IP65 Sealing Bushing
且装配过程完全不需要任何工具,也无需扭力工具拧紧。
无需配备额外的螺母和密封圈,节省了物料总成本。
Sinohua快装防水接头是一种符合人体工程学的电缆密封套和索环组合,通过两种不同硬度的工程塑料和弹性橡胶体混合模塑而成。因此也可以说是一种双组分防水接头。也可称呼为快装式防水密封塞
从外部卡入M20 或 M25 孔(无需攻螺纹),密封唇口和扣合功能可确保可靠密封。 然后,您可以让电缆穿过中心小孔,便可实现电缆接入和壳体密封!
低矮型卡入式防水接头适用于空间受限、可视外观很重要且需要灵活性的应用。 例如,LED照明、电气控制柜体,建筑智能家居、工程、开关设备结构和太阳能设备等。
傻瓜式安装:在安装过程中不需要任何工具和扭矩拧紧。它只是简单地压入到面板或者壳体的圆孔内,咔哒一下即装配到位。
快装式电缆密封接头安装视频参考 MP4 6MB
低矮型卡入式防水密封塞全系列产品资料下载 PDF 465KB
开孔规格 | 适合安装板厚 | 适合电线规格 | D 密封护套外径 | 灰色物料号 | 白色物料号 | 黑色物料号 |
M20 | 0.9-3mm | 7-11mm | 34.2-37.2mm(视乎板厚不同而不同) | 1475801 | W1475801 | B1475801 |
M25 | 0.9-3mm | 7-13mm | 39.2-42.2mm(视乎板厚不同而不同) | 1475802 | W1475802 | B1475802 |
M20 | 2-5mm | 7-11mm | 29.2-34.2mm(视乎板厚不同而不同) | 1475803 | W1475803 | B1475803 |
M25 | 2-5mm | 7-13mm | 34.2-40.2mm(视乎板厚不同而不同) | 1475804 | W1475804 | B1475804 |
信诺华工业快装防水接头装配完成后电缆接头所占空间极小
凸出在壳体表面的高度非常矮,比传统的电缆防水接头凸出高度降低75%!
由于其紧凑的设计,信诺华工业的低矮型卡入式快装防水接头仅在其安装的外壳凸出高度5.5-6.0 mm。如下图所示,这是一些M20卡扣式防水接头和同样规格的传统电缆防水葛兰头安装后的凸出高度非常直观的对比参照。
Quick Lock Cable Gland&Sealing Connector
the quick lock sealing cable gland from Sinohua is a two-component grommet with cable anchorage. Designed as a grommet but with the many of the advantages found in a cable gland and tested with certification to Cable Anchorage Type A – the same standard most cable glands are approved too.
The quick lock sealing cable gland provides cable anchorage, is compact, self-adjusting to its surrounding wall thickness, click-fixes into place, has a membrane seal, is waterproof, requires very little effort to install with its collapsible outer membrane, and saves up to 90% of your installation time.
features of quick lock sealing cable glands from Sinohua engineering:
the Integrated cable anchorage
Low profile compact design for limited height space. looks greater than tradional cable glands
Handles large range of cable diameter
Quick and simple assembly without the use of tools- easy of use
Ergonomic installation.