IP67防水护线套-LTBP系列低矮型设计
在推荐的开孔尺寸大小和电线尺寸范围内,正确的安装LTBP防水护套可满足防水密封等级 IP67-68
可替换MCMASTER 9750K8, 9750K9x 系列Sealing Panel Plugs
IP67防水护线套-低矮型紧凑设计
这些LTBP系列尼龙和TPE弹性橡胶体混合共模注塑而成。
零件用作IP 67/68等级的液密防水密封塞,但也可以用电线,圆钢丝、电线或圆管刺穿,用作具有相同IP 67/68等级的防水防磨损保护衬套。
物料 编号 |
安装板厚 毫米 |
安装孔径 英寸 |
安装孔径 毫米 |
配合线径 英寸 |
配合线径 毫米 |
标准包装 | 产品外径 英寸 |
产品外径 毫米 |
产品高度 英寸 |
产品高度 毫米 |
LTBP 500-063 | 0.5-1.6 | 0.5 | 12,7 | .080 - .200 | 2,0 - 5,1 | 1000 | 0.92 | 23,4 | 0.32 | 8,1 |
LTBP 625-063 | 0.5-1.6 | 0.625 | 15,9 | .130 - .375 | 3,3 - 9,5 | 1000 | 1.03 | 26,2 | 0.32 | 8,1 |
LTBP 750-063 | 0.5-1.6 | 0.75 | 19,1 | .175 - .400 | 4,4 - 10,2 | 1000 | 1.15 | 29,2 | 0.32 | 8,1 |
LTBP 875-063 | 0.5-1.6 | 0.875 | 22,2 | .130 - .450 | 3,3 - 11,4 | 1000 | 1.28 | 32,5 | 0.32 | 8,1 |
LTBP 1000-063 | 0.5-1.6 | 1 | 25,4 | .200 - .715 | 5,1 - 18,2 | 1000 | 1.43 | 36,3 | 0.32 | 8,1 |
LTBP 1093-063 | 0.5-1.6 | 1.093 | 27,8 | .250 - .765 | 6,4 - 19,4 | 1000 | 1.53 | 38,9 | 0.32 | 8,1 |
LTBP 500-250 | 1.6-6.4 | 0.5 | 12,7 | .080 - .200 | 2,0 - 5,1 | 1000 | 0.92 | 23,4 | 0.63 | 15,9 |
LTBP 625-250 | 1.6-6.4 | 0.625 | 15,9 | .130 - .375 | 3,3 - 9,5 | 1000 | 1.03 | 26,2 | 0.63 | 15,9 |
LTBP 750-250 | 1.6-6.4 | 0.75 | 19,1 | .175 - .400 | 4,4 - 10,2 | 1000 | 1.15 | 29,2 | 0.63 | 15,9 |
LTBP 875-250 | 1.6-6.4 | 0.875 | 22,2 | .130 - .450 | 3,3 - 11,4 | 1000 | 1.28 | 32,5 | 0.63 | 15,9 |
LTBP 1000-250 | 1.6-6.4 | 1 | 25,4 | .200 - .715 | 5,1 - 18,2 | 1000 | 1.43 | 36,3 | 0.63 | 15,9 |
LTBP 1093-250 | 1.6-6.4 | 1.093 | 27,8 | .250 - .765 | 6,4 - 19,4 | 1000 | 1.53 | 38,9 | 0.63 | 15,9 |
LTBP 1375-250 | 1.6-6.4 | 1.375 | 34,9 | .300 - .950 | 7,6 - 24,1 | 1000 | 1.8 | 45,7 | 0.67 | 17,0 |
LTBP 1500-250 | 1.6-6.4 | 1.5 | 38,1 | .375 - 1.060 | 9,5 - 26,9 | 1000 | 1.93 | 49,0 | 0.67 | 17,0 |
防水护线套全系列产品图纸下载 PDF 86KB
LTBP系列防水护套的功能和我们如下的另外一款明星产品LTG系列IP67防水护线套有异曲同工之妙。
满足UL 635要求
用于最薄薄至0.020英寸(0.5毫米)和厚至0.250英寸(6.4毫米)的钣金面板。
当用作防磨损护套时,该产品可将钣金原始边缘的披锋孔转化为光滑、整洁、绝缘孔。
用于绝缘和机械保护电气和电信电缆、管道、软管、绳索和公用设施线路。
LTBP系列防水护线套的温度范围:-40华氏度(-40摄氏度)至212华氏度(100摄氏度)
可满足最小拉力值 16Kgf(35Lbs).
特点:LTBP系列防火护套由于其低矮的设计,尤其适合用在空间受限的应用场合,譬如有安装后背侧凸起高度过高会和其他部件造成干扰的顾虑时此款密封塞将是完美的选择。
IP67 Liquid Tight Break-Thru Plugs
These LTBPxxxx co-molded nylon and elastomer parts function as Liquid Tight Plugs with an IP 67/68 rating, yet can be pierced by round wire, cable or tubing to function as Liquid Tight Bushings with the same resulting IP 67/68 rating.
Certified by UL under UL 635
For use in panels as thin as .020" (0,5 mm) and as thick as .250" (6,4 mm).
Provide liquid tight closure when used as a plug. When pierced, functions as a liquid tight bushing that converts raw edged holes to smooth, neat, insulated holes.
Used as a liquid tight bushing, these molded Liquid Tight Break-Thru Plugs from Sinohua insulate and mechanically protect electrical and telecommunications cable, tubing, hose, rope, and utility lines.
Locking fingers snap into holes with fingertip pressure.
Locking fingers in fractional increments up to the maximum panel thickness.
Available in multiple sizes for use in 0.5'' (12,7 mm) to 1.5'' (38,18 mm) diameter holes.
QuickSpecs
Material Nylon 6/6 and TPE
Temperature Range -40°F (-40°C) to 212°F (100°C)
IP Rating IP 67/68