防水型接线帽

防水接线帽  Waterproof Wire Connectors
    
‧  热可塑性工程塑料成型外壳，UL 94V-2阻燃等级。
   额定温度 105°C (221°F)
‧  弹簧式接线头，预先填充绝缘硅胶密封剂。
‧  防水、防尘、防腐。
‧  UL列名可使用于微湿、潮湿、掩埋和雨淋地点。
‧  适用暴露于冷凝、水、蒸气或灰尘处的接线。

型号    主体颜色(+盖颜色）    电气规格    线径范围    包装 包裝

R3S    白色 (+黑色)                600 Volts    20-10 AWG. Copper    
R6S    红色 (+黑色)                600 Volts    20-8 AWG. Copper  
R3     蓝色 (+红色)                 600 Volts    20-10 AWG. Copper    
R6     蓝色 (+黑色)                 600 Volts    20-8 AWG. Copper    

  密封型接线帽产品规格书下载             常规非密封型接线帽(无硅胶密封剂)产品规格书下载

它可容纳尺寸为18-8 AWG的电线。连接器外壳可承受105摄氏度的温度。防水接线帽的侧翼抓握手柄特别设计，使抓握更为轻松，可在最确保额外的杠杆作用抓持力。用于舒适地贴合手指，以提高扭力传动效果。而螺纹漏斗入口可轻松将电线引导到连接器中，金属内置螺旋式结构可更牢固地夹住电线。

地下场合/防水电线连接器

信诺华工业的R3/R6防水电线连接器提供紧密的防水密封和安全的电线连接。避免电线连接失效，在深埋和潮湿的地方使用防水连接器连接导线。我们提供多种防水电线连接器供您选择！

预填充非硬化硅酮密封剂的防水缠绕式电线连接器，适用于户外应用、灌溉系统和景观照明。防腐蚀材料。

在潮湿、潮湿、防雨和地下深埋处依然保护电线。易于一步安装，无需预处理。

密封导线连接器是缠绕式导线连接器的领先技术，通过我们坚固可靠的防风雨和地下导线连接器，使其更容易使用。

耐用性：这些耐用电线连接器专门设计用于处理暴露在潮湿/潮湿和直接埋入/低于地面条件下的电线连接。

性能：每个连接器都预先填充了持久的100%硅酮密封胶，可保护电气连接免受最恶劣环境的影响。

成本节约：它们也为你节省时间和金钱。

对于采用其他传统连接器的应用，必须搭配使用热缩管、多重防腐蚀套件或填缝和电绝缘胶带来保护电气连接免受湿气和腐蚀。这些来自Sinohua的预填充导线连接器省去了这些昂贵、耗时的步骤，只需几次简单的扭转即可为您恶劣环境的电气连接提供最大的保护。
 

Screw-On Waterproof Wire Connectors

For fast, easy, and safe electrical wire connections, you need these wire nuts(connectors).
Waterproof Wire Connectors-Swept-wing design for comfort and greater leverage,Sinohua's wire connectors are designed to fit your fingers comfortably for increased torque strength. Ribbed exteriors make gripping easier, and deep skirt entries provide protection against flash-over and shorts. Threaded funnel entries guide wires into the connectors easily, and internal wire springs offer more secure gripping on electrical conductors.
    
●     Tough thermoplastic, UL 94V-2 flame-retardant shell
 for 105℃ (221℉).
●     Rated to 600V max. for building wiring and 1000V
 max. signs or luminaires.
●     Screw-on wire connectors pre-filled with dielectric
 silicone sealant.
●     Silicone-based sealant protects against moisture and corrosion. Waterproof, dustproof and corrosion proof.
●     UL Listed to 486D for use in damp, wet, direct bury and raintight locations.
It accommodates copper wire of size 18 - 8 AWG. Connector shell withstands temperature of 105 deg C. The swept-wing of the connector is particularly designed to secure extra leverage grip on maximum wire combinations.

Underground/Waterproof wire connectors
Sinohua provides a tight waterproof seal and secure wire connection with its R3/R6 waterproof wire connectors. Avoid failing your electrical wiring inspection and use a waterproof connector to all your wiring projects at wet and damped location. we offer a wide selection of watertight waterproof wire nut connectors for your convenience!
waterproof twist-on wire connectors pre-filled with non-hardening silicone sealant,which are meant for outdoor applications, irrigation systems, and landscape lighting. Corrosion proof materials.
Protects wires in damp, wet, rain tight, and submersible locations. Easy one-step installation, no pre-twisting required.

Should you have a tough job. the watertight wire connector, the leading technology in twist-on wire connectors, makes it easier with our tough and dependable WeatherProof and UnderGround Wire Connectors.
Durability: These harsh-duty wire connectors have been designed specifically to handle wire connections exposed to damp/wet and direct bury/below grade conditions.
Performance: Each connector is pre-filled with a long-lasting, 100% silicone sealant that protects your electrical connections from the most severe environments.
Cost Savings: They save you time and money, too.
With other connectors, you have to use heat shrink,resin packs, multi-step corrosion kits, or caulk and tape to protect your electrical connections from moisture and corrosion. These pre-filled wire connectors from Sinohua eliminate these costly, time-consuming steps and give you maximum protection with just a few simple twists.