尼龙卡位防脱落垫片 retaining washer - RWS210
卡位防脱落垫片
紧固件被卡入垫圈内侧的突出挡片可以起到卡紧螺丝的作用
防止紧固件在轴向的位移。多种不同款式及规格可供选择。
绝缘,轻量化,无生锈风险 无磁性(没有干扰)
紧固件被卡入垫圈内侧的突出挡片可以起到卡紧螺丝的作用
防止紧固件在轴向的位移。多种不同款式及规格可供选择。
绝缘,轻量化,无生锈风险 无磁性(没有干扰)
物料编号 | D | B | A | T | H | 配合螺纹-公制 | 配合螺纹-英制 |
100201192 | 1,98 | 2,92 | 5,16 | 0,81 | 0,30 | M2.5 | #2 |
100201193 | 1,98 | 2,92 | 5,16 | 1,58 | 0,30 | M2.5 | #2 |
100203100 | 2,59 | 3,96 | 6,30 | 1,27 | 0,40 | M3 | #4 |
100201194 | 2,59 | 3,96 | 6,75 | 0,81 | 0,40 | M3 | #4 |
100201195 | 2,59 | 3,96 | 6,75 | 1,58 | 0,30 | M3 | #4 |
100201196 | 2,59 | 3,96 | 6,75 | 3,18 | 0,40 | M3 | #4 |
100201198 | 3,25 | 5,03 | 8,20 | 1,58 | 0,25 | M3,5 | #6 |
100201197 | 3,25 | 5,03 | 8,33 | 0,81 | 0,25 | M3,5 | #6 |
100203102 | 3,43 | 5,54 | 11,51 | 1,14 | 0,40 | M4 | #8 |
100201200 | 3,86 | 5,97 | 9,74 | 1,58 | 0,40 | M4 | #8 |
100201199 | 3,86 | 5,97 | 9,92 | 0,81 | 0,40 | M4 | #8 |
100203103 | 4,50 | 6,99 | 19,99 | 1,50 | 0,35 | M5 | #10 |
100201201 | 4,50 | 7,04 | 11,51 | 0,81 | 0,35 | M5 | #10 |
100201202 | 4,50 | 7,04 | 11,51 | 1,58 | 0,30 | M5 | #10 |
100202675 | 4,50 | 7,04 | 12,70 | 1,58 | 0,40 | M5 | #10 |
100203104 | 4,50 | 7,04 | 16,00 | 1,58 | 0,30 | M5 | #10 |
S00200200 | 4,55 | 7,15 | 11,55 | 1,63 | 0,42 | M5 | #10 |
100203101 | 5,46 | 9,40 | 19,05 | 1,58 | 0,35 | M6 | 1/4 in |
100202640 | 5,94 | 8,74 | 12,70 | 0,81 | 0,35 | M6 | 1/4 in |
100201203 | 5,94 | 9,53 | 15,08 | 0,81 | 0,35 | M6 | 1/4 in |
100201204 | 5,94 | 9,53 | 15,08 | 1,58 | 0,35 | M6 | 1/4 in |
100203106 | 5,94 | 9,53 | 38,20 | 1,58 | 0,35 | M6 | 1/4 in |
100203105 | 5,94 | 11,43 | 38,20 | 1,58 | 1,00 | M6 | 1/4 in |
100201205 | 7,42 | 11,94 | 18,65 | 0,81 | 0,40 | M8 | 5/16 in |
100201206 | 7,42 | 11,94 | 18,65 | 1,58 | 0,40 | M8 | 5/16 in |
100202676 | 8,89 | 14,25 | 32,00 | 1,57 | 0,30 | M10 | 3/8 in |
100203107 | 8,89 | 14,33 | 18,65 | 1,58 | 0,35 | M10 | 3/8 in |
100201207 | 8,89 | 14,33 | 22,62 | 0,81 | 0,40 | M10 | 3/8 in |
100201208 | 8,89 | 14,33 | 22,62 | 1,58 | 0,40 | M10 | 3/8 in |
100201209 | 10,41 | 14,48 | 26,30 | 0,81 | 0,30 | M12 | 7/16 in |
100201210 | 10,41 | 14,48 | 26,30 | 1,58 | 0,30 | M12 | 7/16 in |
100201211 | 11,89 | 17,53 | 28,58 | 0,81 | 0,30 | M14 | 1/2 in |
100201212 | 11,89 | 17,53 | 28,58 | 1,58 | 0,30 | M14 | 1/2 in |
100202641 | 20,75 | 23,75 | 34,14 | 1,58 | 0,40 | M22 | 7/8 in |
100202677 | 24,50 | 27,18 | 35,00 | 1,58 | 0,40 | M26 | 1 in |
防脱垫片 anti-loss washer
也称为止动垫圈或止动环,是一种易装配并将螺杆固定到特定位置的紧固件。这种防脱垫片通常具有特别设计的内径及一圈均匀分布的内齿,以允许垫圈容易地滑动到位并夹紧螺杆、螺栓或产品部件的外部。这些防脱垫片在安装时足够灵活,当然--如有需要拆除时也很简单。
Sinohua anti-loss and retaining washer is similar to our standard flat washers, but with a specially configured I.D. designed to grip the outside of the screw shank. The anti-loss washer slides on the screw easily, but is retained on the screw. For use in applications requiring pre-assembly of the screw and washer, to reduce final assembly cost.
So these anti-loss retaining Washers, of course, are also called Captive Washers due to captive function.