快锁式波纹管夹 hinged locking conduit clip
尤其适合作为波纹管底座使用，常备库存9种规格
快速装配。方便拆卸。可预先把管夹固定，波纹管可以后端工序再装。
快速装配。方便拆卸。可预先把管夹固定，波纹管可以后端工序再装。
带活动一体式固定顶盖，减少物料编号，替换市面上传统的顶盖和底座两件式设计
快速装配。方便拆卸。可预先把管夹固定，波纹管可以后端工序再装。
尤其适合固定波纹管
可竖直或者水平叠加
顶盖固定非常方便，手指轻轻按压即可。拆卸亦然。
| 型号 | 适配软管规格AD | H(mm) | B(mm) | T(mm) | M(mm) | A(mm) | 产品资料下载 |
| FCL10 | AD10.0 | 30 | 23 | 10 | 4 | 6.5 | PDF规格书下载 |
| FCL13 | AD13.0 | 30 | 23 | 10 | 4 | 6.5 | PDF规格书下载 |
| FCL16 | AD15.8 | 30 | 23 | 10 | 4 | 6.5 | PDF规格书下载 |
| FCL18 | AD18.5 | 35 | 30 | 10 | 5 | 6.5 | PDF规格书下载 |
| FCL21 | AD21.2 | 35 | 30 | 10 | 5 | 6.5 | PDF规格书下载 |
| FCL28 | AD28.5 | 42 | 38 | 12 | 6 | 11.5 | PDF规格书下载 |
| FCL34 | AD34.5 | 51 | 43 | 12 | 6 | 11.5 | PDF规格书下载 |
| FCL42 | AD42.5 | 61 | 51 | 16.0 | 6 | 11.5 | PDF规格书下载 |
| FCL54 | AD54.5 | 74 | 64 | 20 | 6 | 11.5 | PDF规格书下载 |
Sinohua FCLxx Conduit/Tubing Mounting Clips
With Integral Closure
- For use with most industrial corrugated conduit/tubing,
- Suitable for use with both fine and/or coarse pitch conduit/tubing.
- For mounting corrugated conduit or tubing securely into place, vertically or horizontally.
- Only fingertip pressure is required to snap conduit or tubing into bracket.
- Suitable for use by original equipment manufacturers.
- Low profile design for space savings and pleasing appearance.
- Recommended distance between brackets at intervals not greater than 3 feet (914 mm) as required by Article 351-27 of 1996 NEC.
- Use one standard M4-M6 screw for attaching bracket to panel or chassis (screw not included).
- Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
- Can be easily opened for temporary access/removal and closed again to secure conduit.
