按压式门锁搭扣,同SOUTHCO C3系列

防振侧面内装式卡入安装门扣

搭扣式门锁-同SOUTHCO索斯科C3系列-三种不同的拉拔力强度可选

SC3-803,内部加载轻型弹簧，构造了大约10N的闭锁拉拔力强度。同southco c3-803.

SC3-805,内部加载中型弹簧，构造了大约20N的闭锁拉拔力强度。同southco c3-805.

SC3-810,内部加载重型弹簧，构造了大约40N的闭锁拉拔力强度。同southco c3-810.

 按压式门锁搭扣产品规格书下载

 按压式门锁搭扣CAD 三维模型下载 IGS 1.46MB

以上三款内装式塑料搭扣可以完美地替换美国MCMASTER 12855A33,12855A11和mcmaster carr 12855A12.
抓取式搭扣门锁 要获得额外的门关闭力,可用此类小巧门锁内部的带弹簧锁舌,其可能实现上偏心闭锁。内置上拉式提供了压力来防止门与门框松开或碰撞。
房车及游艇船舶舱柜安全锁配件

特别适合应用于需要方便快速锁闭及开启的船舶或房车及医疗设备。同时可以防止抽屉和橱柜无意打开(譬如风力等影响)

为带有内部弹簧加载棘爪和偏心闭锁的舱门或者盖提供额外的关闭锁紧力

内置的上拉张力有助于防止门或盖板在框架上松动和嘎嘎作响

可安装在任何方向，以实现最大的安装灵活性

预紧动作将门拉得更紧以锁定。

如下是C3抓取式搭扣门锁的客户常见问题收集：
1.功能用途？ 塑料搭扣门锁；舱门盖板的快速锁闭及紧固，适合频繁开启的设备。
锁舌材质: 其他把手材质: 塑料
2.这款抓取式搭扣门锁是否受到开门方向的约束和制约？是否分左开右开门的影响？开门方向: 通用型；不分左右均可装配； 

3. 这款按压式门锁扣是否可设计为带钥匙？不，不带钥匙  饰面颜色: 黑
 

Side Mount Concealed Push-To-Close Latch

Vibration-Resistant Grab Latch
Surface Mount door catch and keeper,3 types of pull force available:

3 lbs. Maximum Pull Strength, cross reference southco c3-803;5 lbs. Maximum Pull Strength, cross reference southco c3-805 while 10 lbs. Maximum Pull Strength, cross reference southco c3-810.
Provides additional closing force on doors with internal spring-loaded pawl and over center latching
Built-in pull-up tension helps prevent looseness and rattle of the door or drawer against the frame
Can be mounted in any orientation to allow flexibility in installation
Over center action pulls door tighter to latch, releasing when you pull to open door.

Installs either right side or left side by using #4 screws or .125 rivets to install. 
This product is a necessity in the RV/marine/medical equipment etc.

These pull to open,push to close door latches from Sinohua are perfect solutions to Stop drawers and cabinets from flying open when you turn for a safer boat or RV.